The equipment name is the H13XD6 lift truck.

The manufacturer of this equipment is HYSTER.

The rated capacity for this model is 13,500 kg at a 600 mm load centre. The service weight is 18,403 kg. This truck uses a Diesel powertrain/drivetrain and is equipped with a Cummins QSB 6.7L Stage IIIA diesel engine.

Regarding the specific requested data points, the sources note the following:

• Manufacturer Date: 2012.

• Serial Number: H019E01833K.

• Working Hours / Condition: USED ,Unavailable working hours

The equipment detailed in technical specifications includes the XCMG Internal The technical specifications provided in the sources cover the Hyster H10-16XD6-12 Series of lift trucks, including models H13XD6, H14XD6, H10XD12, and H16XD6. These are seated operator type trucks with a diesel powertrain/drivetrain.

Capacity and Weight Specifications

The rated capacity and service weight vary by model, based on the standard configuration (Stage IV engine and standard pin type carriage):

The capacities may change based on specific equipment, such as the use of a sideshift frame pin type carriage or a QD DFSSFP carriage, and will also vary depending on sideshift and back-tilt settings.

Engine and Powertrain Details

The equipment uses a Diesel powertrain.

• Engine: The engine is a Cummins QSB 6.7 model, compliant with Stage IIIA EPA/CE standards.

• Performance: The engine has a power output of 116 kW according to ISO 1585, with a peak output of 116 kW. The rated speed is 2,300 min⁻¹.

• Torque: Engine torque reaches 597 Nm at 1,500 min⁻¹.

• Cylinders/Displacement: It features 6 cylinders with a total displacement of 6,700 cm³.

• Transmission and Drive: The drive control is a hydrodynamic transmission (Torque Converter coupling). The transmission is a ZF WG161 with 3 speeds forward and 3 speeds backward, featuring auto-shifting. The drive axle is a Kessler D81.

• Braking: The service brake utilizes oil immersed (wet) discs, while the parking brake is a spring applied, dry disc on the drive axle.

Dimensions and Hydraulics

The specifications for mast tilt, wheelbase, and overall width are consistent across the H13XD6, H14XD6, H10XD12, and H16XD6 models in the standard configuration:

• Mast Tilt: Standard mast tilt is 15° forward / 12° backward ($\alpha/\beta$).

• Lift: The lift height ($h3$) is 4,910 mm, with a free lift ($h2$) of 0 mm. The height of the mast lowered ($h1$) is 4,193 mm, and the height mast extended ($h4$) is 6,648 mm.

• Wheelbase and Overhang: The wheelbase ($y$) is 3,300 mm, and the overhang ($l5$) is 809 mm.

• Overall Width: The overall width ($b2$) is 2,541 mm.

• Carriage: The standard fork carriage type is an 85 mm pin type carriage with a width ($b3$) of 2,496 mm.

• Ground Clearance: The ground clearance when laden is 245 mm below the mast ($m1$) and 341 mm at the centre of the wheelbase ($m2$).

• Turning Radius: The outside turning radius ($W_a$) is 4,584 mm, and the internal turning radius ($b13$) is 1,890 mm.

• Hydraulics: The operating pressure for attachments is 22.5 bar. The hydraulic tank capacity is 140 litres.

Performance Data (H16XD6 / H10XD12)